|
|
|||||||
| 产品分类 Product Center |
||||||||||||
| 生活污水处理设备 | ||||||||||||
| 污泥浓缩设备 | ||||||||||||
|
| ||||||||||||
| 过滤沉淀设备 | ||||||||||||
| 气浮沉淀设备 | ||||||||||||
| 医用污水处理设备 | ||||||||||||
| 屠宰污水处理设备 | ||||||||||||
| 刮吸泥设备 | ||||||||||||
| 污水处理设备 | ||||||||||||
| 酸洗磷化污水处理设备 | ||||||||||||
| 农村生活污水处理改造 | ||||||||||||
| 污水处理实验结果 | ||||||||||||
| 矿井污水处理设备 | ||||||||||||
| 河道系统综合治理 | ||||||||||||
| 废气处理设备 | ||||||||||||
| 污水处理药剂 | ||||||||||||
| 水处理自动加药装置 | ||||||||||||
| 垃圾焚烧炉 | ||||||||||||
| 高浓度工业污水处理 | ||||||||||||
| 全国服务热线电话 HOTLINE | |
| 400-863-7369 |

污泥干化系统
经我公司研发,运用“污泥无热干化高压破壁脱水装备+空气能节能型低温烘干装备”,经压滤破壁脱水低温烘干使污泥成型颗粒含水率小于20%;污泥含水率小于20%以下低位热值达到2200-3500Kcal/kg以上(由污泥有机质高低决定),因此含水率小于20%以内的污泥颗粒可以进入生物质锅炉燃烧,也可以掺混小于20%以内污泥颗粒进入循环流化床锅炉燃烧。
系统优点
安全环保更安全:超低温设计(35-85℃)无扬尘爆炸隐患、系统运行安全。
采用密闭系统设计,无臭气外排、可直接安装在场区内、出料温度小于45℃,无需二次冷却,可直接储存。
技术先进更科学:模块化设计、智能控制、自动化运行调温、高效维保、PLC显示故障。
降低运行成本:运行成本低、使用寿命长、不增加配套成本、自动化系统不增加人工成本。
Sludge drying system
Developed by our company, the use of "non-thermal drying of sludge high pressure wall breaking dewatering equipment + air energy saving low temperature drying equipment", the water content of sludge formed particles is less than 20% by pressing and filtering wall breaking dehydration low temperature drying equipment; The low calorific value of the sludge with water content less than 20% is more than 2200-3500Kcal/kg (determined by the level of sludge organic matter), so the sludge particles with water content less than 20% can enter the biomass boiler for combustion, and the sludge particles with water content less than 20% can also be mixed into the circulating fluidized bed boiler for combustion.
System advantage
Safety and environmental protection safer: ultra-low temperature design (35-85℃) no dust explosion hazards, safe system operation.
Closed system design, no odor exhaust, can be directly installed in the field, discharge temperature is less than 45℃, no secondary cooling, can be directly stored.
Advanced technology more scientific: modular design, intelligent control, automatic operation temperature control, efficient maintenance, PLC display fault.
Reduce operating costs: low operating costs, long service life, no increase in supporting costs, automation system does not increase labor costs.
|
|||||||||||||||||||||
|
|||||||||||||||||||||